This listing is for the transfers ONLY- You are responsible to have knowledge of how to operate a heat press. Measurements are approximately how tall the design is not wide.
DTF- Can go on any Fabric and needs to be pressed at 325 for 10-12 seconds, and COLD PEEL!
Follow these simple instructions for a perfect application OF A DTF TRANSFER:
- Position and place the transfer onto the garment and place a transfer/parchment paper for the best results.
- Press the transfer using an heat press or an iron at 320F using medium pressure for 15 seconds.
- Allow it to cool at least 2-3 minutes and peel from any side. Cold peel option is chosen by default for the best results.
- There is no need for a repress but it is recommended. So for a repress, simply place the parchment paper again and press 320F for 15 seconds.
RECOMMENDED APPLICATION INSTRUCTIONS FOR GARMENTS WITH SUBLIMATION TRANSFERS (These can be tricky and need practice but make beautiful shirts GARMENT MUST BE ATLEAST 50 PERCENT POLYESTER AND LIGHT IN COLOR FOR SUBLIMATION)
- Set temperature to between 385 and 400 °F.
- Set timer to 60 seconds.
- Set Pressure at medium.
- Place the paper face down on garment.
- Cover with a sheet of parchment or butcher paper. Use a new sheet of paper for each transfer.
- Press at 385 to 400 °F for 60 seconds with medium pressure.
- Remove paper immediately and peel hot.